Altendorf Sliders™

STOCK #

DESCRIPTION

27879

ALT WA-8 1800
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, CROSSCUT-MITRE FENCE AND QUICK-CHANGE TOOL SYSTEM *NEW MACHINE LOCATED IN HONOLULU, HI * PROMO PRICE!

30786

ALT F-45 STD 3800
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH FINE ADJUSTMENT; 10 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

30791

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30792

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30793

ALT F-45 CHALLENGER 3400 W/DIGIT LD
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH DIGITAL READOUTS OF FLIP STOPS AND MITER ANGLE (DIGIT LD) WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DIGIT LD; *ADDITIONAL FLIP STOP * PROMO PRICE!

30809

ALT F-45 SELECT 3400 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE, *DL, *ADDITIONAL FLIP STOP * PROMO PRICE!

30810

ALT F-45 SELECT 3400 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE, *DL, *ADDITIONAL FLIP STOP * PROMO PRICE!

30811

ALT F-45 SELECT 3400 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE, *DL, *ADDITIONAL FLIP STOP * PROMO PRICE!

30815

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30821

ALT F-45 SELECT 3400 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH DIGITAL READOUTS OF FLIP STOPS A; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DL; *ADDITIONAL FLIP STOP * PROMO PRICE!

30822

ALT F-45 SELECT 3400 DIGIT LD
*2007 MACHINE, MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH DIGITAL READOUTS OF FLIP STOPS AND MITER ANGLE (DIGIT LD) WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DIGIT LD; *ADDITIONAL FLIP STOP * PROMO PRICE!

30825

ALT F-45 SELECT 3400 DIGIT LD
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH DIGITAL READOUTS OF FLIP STOPS AND MITER ANGLE (DIGIT LD) WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DIGIT LD; *ADDITIONAL FLIP STOP * PROMO PRICE!

30837

ALT F-45 SELECT 3400 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE, *DL, *ADDITIONAL FLIP STOP * PROMO PRICE!

30840

ALT F-45 SELECT 3400
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

30844

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30846

ALT F-45 CHALLENGER 3400
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

30852

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30853

ALT F-45 STD 3400 DX
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DX * PROMO PRICE!

30856

ALT F-45 SELECT 3400
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

30857

ALT F-45 SELECT 3400
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

30858

ALT F-45 SELECT 3400
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 7.5 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE * PROMO PRICE!

31662

ALT F-45 CHALLENGER 3800 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 10 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DL; *ADDITIONAL FLIP STOP * PROMO PRICE!

31663

ALT F-45 CHALLENGER 3800 DL
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SCORING SYSTEM AND TWO-AXIS PROGRAMMABLE SCORING UNIT WITH MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH VARIABLY ADJUSTABLE STOPS (2) FROM 155 MM (6.1") TO 3500 MM (137.8") WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 10 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DL; *ADDITIONAL FLIP STOP * PROMO PRICE!

31666

ALT F-45 SELECT 3800 DIGIT LD
MAIN BLADE ON MACHINE; RAPIDO SHIMLESS SCORING SYSTEM WITH TWO-AXIS PROGRAMMABLE SCORING UNIT AND MEMORY HOME POSITION; CROSSCUT MITER FENCE WITH DIGITAL READOUTS OF FLIP STOPS AND MITER ANGLE (DIGIT LD) WITH LENGTH COMPENSATION/MANUALLY ADJUSTED; MOTORIZED RIP FENCE; 10 HP MAIN MOTOR, CUTTING SPEEDS 3/4/5000 RPM; ARTICULATING, EYE-LEVEL, LCD, DIGITAL, PROGRAMMABLE CONTROLLER CAPABLE OF STORING 20 PROGRAMS AND HAS A USB DATA PORT; MOTORIZED BLADE RISE/FALL/TILT ADJUSTMENT; AUTOMATIC BLADE TILT HEIGHT COMPENSATION; ON/OFF SWITCH LOCATED ON SLIDING TABLE; *DIGIT LD; *ADDITIONAL FLIP STOP * PROMO PRICE!

32083

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32090

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32091

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL *PROMO PRICE!

32092

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL *PROMO PRICE!

32093

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL *PROMO PRICE

32094

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL *PROMO PRICE!

32095

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL *PROMO PRICE!

32096

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32097

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32098

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32099

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32100

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32101

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32103

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32104

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32105

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32107

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32108

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32109

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32110

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32111

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32112

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE!

32113

ALT WA-80 3200
MOTORIZED RAISE LOWER AND TILTING OF THE SAW UNIT, 7.5 HP MAIN MOTOR WITH THREE SPEEDS 3/4/5000 RPM, MAX SAW BLADE CAPACITY 400MM, STEEL GUIDANCE SYSTEM, RAPIDO SHIM-LESS SCORING, "NEW" MANUAL RAISE AND LOWER SCORING MOTOR, FIXED CROSSCUT FENCE WITH VARIABLY ADJUSTED STOPS (2) FROM 155MM TO 3200MM, SINGLE-SIDED MITER FENCE, QUICK-CHANGE TOOL SYSTEM; ; MANUAL RIP FENCE WITH DIGITAL READOUT (DX) AND FINE ADJUSTMENT, OVERHEAD CONTROL PANEL * PROMO PRICE

Brandt Edgebanders

STOCK #

DESCRIPTION

16089

BRT F-10/50
TOP / BOTTOM TRIMMER FOR SHAPED WORKPIECES. TRIM MOTORS 0.26 KW, 3,000 RPM; MAX EDGE THICKNESS 1MM (1997) *SHOW MACHINE LOCATED IN GRAND RAPIDS, MI, *"AS IS, WHERE IS" *CLEARANCE PRICE!

28868

BRT 4310 PORTABLE TRIMMER
BRANDT HAND HELD TRIMMING UNIT TO BE USED WITH THE KTD 720, 2 MM RADIUS CUTTER, 22 DEGREE BEVEL CUTTER, 115V SINGLE PHASE, 2006 MACHINE

30653

BRT KDN-330 OPTIMAT
ELECTRONIC LINE CONTROL, HIGH FREQ TRIMMING MOTORS, CONTACT HEATING SHOE TO WARM PANEL EDGE, HOT MELT, AUTOMATIC MAGAZINE, DOUBLE MOTOR END TRIM, TOP AND BOTTOM FINE TRIMMING WITH DIGITAL COUNTERS, PANEL THICKNESS MAX 50MM, FEED SPEED 36FPM, 208/230/440/480V, CONNECT 230V. *NEW MACHINE LOCATED IN HIGH POINT, NC * PROMO PRICE!

30668

BRT KDN-210 OPTIMAT
*2007 MACHINE, ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, OPEN SPACE TO ADD BUFFING OR SCRAPING UNIT IN THE FUTURE, 3 MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO!

30674

BRT KDF-350 C OPTIMAT
*2007 MACHINE, JOINT TRIMMING UNIT, PC-16 PROGRAM CONTROL, DOUBLE MOTOR END TRIMMING WITH PROGRAM CONTROLLED INDEXING, FINE TRIM UNIT WITH PROGRAM CONTROLLED INDEXING, SCRAPING UNIT WITH PROGRAM CONTROLLED INDEXING, BUFFING UNIT, CONTOUR TRIMMING UNIT, 50 MM PANEL THICKNESS, 36 FPM FEED SPEED, *3MM TOOLING, 208/230/440/480 VOLT, 3 PH, 60 HZ; CONNECT VOLTAGE 230 V * PROMO! * BILLED AS "7000TH 300 SERIES MACHINE" AT IWF 2008

30685

BRT KDN-650/20 OPTIMAT
PC-20, QUICK MELT GLUING UNIT, FEED SPEED 52 FPM, 20 MM EDGE THICKNESS CAPACITY, END TRIM WITH PROGRAM CONTROLLED TILT, FLUSH TRIM UNIT WITH TWO POSITIONING VERTICAL INDEXING, FINE TRIM WITH DFC TOOLING / AUTO TILT AND WITH PNEUMATIC INDEXING, SCRAPING UNIT WITH PROGRAM POSITIONING, BUFFING UNIT, 3MM TOOLING, 208/230 VOLTS CONNECTED 230 VOLTS, 3 PH, 60 HZ. * PROMO PRICE!

30749

BRT KDF-970 2C PROFILINE
*2007 MACHINE, PC-20, JOINT TRIMMING UNIT, QUICK MELT, 20 MM EDGE THICKNESS, VARIABLE FEED SPEED 39-65 FPM, SERVO MOTOR TOP PRESSURE BEAM, EXTENDED MAGAZINE FOR SOLID WOOD STRIPS WITH EXTERNAL FEEDING OF COILS AND WOOD STRIPS, SERVO MOTOR PRESSURE ZONE, END TRIM WITH PROGRAM TILT, FLUSH TRIM WITH 2 POSITION VERTICAL INDEXING, FINE TRIM WITH DFC TOOLING AUTO TILT WITH SERVO MOTOR TO EDGE THICKNESS AND SIDE COPY, TWO MOTOR CONTOUR TRIMMING UP TO 52 FPM FEED SPEED, PROFILE SCRAPING UNIT WITH PROGRAM CONTROL, SURFACE SCRAPING UNIT, OSCILLATING / JUMP BUFFING UNIT, 208/230 VOLTS CONNECTED 230 VOLTS, 3MM TOOLING. * PROMO PRICE!

31382

BRT KDN-650 C SERVO
PC-20, STANDARD GLUING UNIT, DUAL FEED SPEED 52 / 36 FPM, 36 FPM WHEN CONTOUR TRIMMING, END TRIM WITH PROGRAM CONTROLLED TILT, 12MM EDGE THICKNESS CAPACITY, FINE TRIM WITH DFC TOOLING AND SERVO MOTOR POSITIONING INCLUDING AUTO TILT FEATURE, TWO MOTOR CONTOUR TRIM UNIT # 4803, SCRAPING UNIT WITH PROGRAM POSITIONING, BUFFING UNIT, 3MM TOOLING, 208/230 VOLTS, 3 PH, 60 HZ, CONNECTED 230 VOLTS. * PROMO PRICE!

31383

BRT KDN-650 C SERVO
PC-20, STANDARD GLUING UNIT, DUAL FEED SPEED 52 / 36 FPM, 36 FPM WHEN CONTOUR TRIMMING, END TRIM WITH PROGRAM CONTROLLED TILT, 12MM EDGE THICKNESS CAPACITY, FINE TRIM WITH DFC TOOLING AND SERVO MOTOR POSITIONING INCLUDING AUTO TILT FEATURE, TWO MOTOR CONTOUR TRIM UNIT # 4803, SCRAPING UNIT WITH PROGRAM POSITIONING, BUFFING UNIT, 3MM TOOLING, 208/230 VOLTS, 3 PH, 60 HZ, CONNECTED 230 VOLTS. * PROMO PRICE!

31384

BRT KDN-650 C QM SERVO
PC-20, * QUICK MELT GLUING UNIT, DUAL FEED SPEED 52 / 36 FPM, 36 FPM WHEN CONTOUR TRIMMING, END TRIM WITH PROGRAM CONTROLLED TILT, 12MM EDGE THICKNESS CAPACITY, FINE TRIM WITH DFC TOOLING AND SERVO MOTOR POSITIONING INCLUDING AUTO TILT FEATURE, TWO MOTOR CONTOUR TRIM UNIT # 4803, SCRAPING UNIT WITH PROGRAM POSITIONING, BUFFING UNIT, 3MM TOOLING, 208/230 VOLTS, 3 PH, 60 HZ, CONNECTED 230 VOLTS. * PROMO PRICE!

31388

BRT KDN-210 S OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, PROFILE SCRAPING UNIT, 3MM TOOLING, 208/230/440/480 VOLTS CONNECT 230 VOLTS. * PROMO PRICE!

31392

BRT KDN-210 OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, OPEN SPACE TO ADD BUFFING OR SCRAPING UNIT IN THE FUTURE, 3 MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31557

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31558

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31559

BRT KDN-340 P OPTIMAT
PC-16 PROGRAM CONTROL, HIGH FREQ TRIMMING MOTORS, HOT MELT, PANEL EDGE PRE-HEATING SYSTEM, DOUBLE MOTOR END TRIM, TOP AND BOTTOM FINE TRIMMING WITH DIGITAL COUNTER, SCRAPING UNIT WITH TOP, BOTTOM AND SIDE TRACING DEVICE, TOP AND BOTTOM BUFFING UNIT,PANEL THICKNESS MIN 8MM, MAX 50MM, FEED SPEED 36 FPM, 208/230/440/480 TRANSFORMER, CONNECT 230V. 3MM TOOLING * PROMO PRICE!

31561

BRT KDF-530 C SERVO
PC-20 CONTROLLER, JOINT TRIMMING UNIT WITH DIAMOND 2 CUTTER HEADS, AUTOMATIC MAGAZINE, PANEL PRE-HEATING SHOE, GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, DOUBLE MOTOR END TRIM UNIT WITH STRAIGHT AND CHAMFER CAPABILITY - PNEUMATIC INDEXING FROM STRAIGHT TO BEVEL, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, CONTOUR TRIMMING UNIT, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY, 50 MM PANEL THICKNESS, 36/46 FPM FEED SPEED, 208/230V - 3PH - 60 HZ - CONNECT 230V, **2MM TOOLING * PROMO PRICE!

31562

BRT KDN-520 SERVO
PC-20 CONTROLLER, AUTOMATIC MAGAZINE, NEW STANDARD GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, END TRIM UNIT WITH PNEUMATICS, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY. 208/230/440/480V - 3PH - 60 HZ - CONNECT 230V - 50 MM PANEL THICKNESS. 14 M/MIN FEED SPEED ( 46 FPM ). 3MM TOOLING * PROMO PRICE!

31563

BRT KDN-520 SERVO
PC-20 CONTROLLER, AUTOMATIC MAGAZINE, NEW STANDARD GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, END TRIM UNIT WITH PNEUMATICS, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY. 208/230/440/480V - 3PH - 60 HZ - CONNECT 230V - 50 MM PANEL THICKNESS. 14 M/MIN FEED SPEED ( 46 FPM ). 3MM TOOLING * PROMO PRICE!

31564

BRT KDN-340 P OPTIMAT
PC-16 PROGRAM CONTROL, HIGH FREQ TRIMMING MOTORS, HOT MELT, PANEL EDGE PRE-HEATING SYSTEM, DOUBLE MOTOR END TRIM, TOP AND BOTTOM FINE TRIMMING WITH DIGITAL COUNTER, SCRAPING UNIT WITH TOP, BOTTOM AND SIDE TRACING DEVICE, TOP AND BOTTOM BUFFING UNIT,PANEL THICKNESS MIN 8MM, MAX 50MM, FEED SPEED 36 FPM, 208/230/440/480 TRANSFORMER, CONNECT 230V. 3MM TOOLING * PROMO PRICE!

31566

BRT KDF-530 C SERVO NESTED
PC-20 CONTROLLER, JOINT TRIMMING UNIT WITH DIAMOND 2 CUTTER HEADS, AUTOMATIC MAGAZINE, PANEL PRE-HEATING SHOE, GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, DOUBLE MOTOR END TRIM UNIT WITH STRAIGHT AND CHAMFER CAPABILITY - PNEUMATIC INDEXING FROM STRAIGHT TO BEVEL, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, CONTOUR TRIMMING UNIT, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY, 50 MM PANEL THICKNESS, 36/46 FPM FEED SPEED, 208/230V - 3PH - 60 HZ - CONNECT 230V, **3MM TOOLING. EQUIPPED WITH NESTED-READY PACKAGE ON FINE TRIM AND SCRAPING STATIONS. * PROMO PRICE!

31568

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31574

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31692

BRT KDN-210 OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, OPEN SPACE TO ADD BUFFING OR SCRAPING UNIT IN THE FUTURE, 3 MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31697

BRT KDF-530 C SERVO
PC-20 CONTROLLER, JOINT TRIMMING UNIT WITH DIAMOND 2 CUTTER HEADS, AUTOMATIC MAGAZINE, PANEL PRE-HEATING SHOE, GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, DOUBLE MOTOR END TRIM UNIT WITH STRAIGHT AND CHAMFER CAPABILITY - PNEUMATIC INDEXING FROM STRAIGHT TO BEVEL, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, CONTOUR TRIMMING UNIT, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY, 50 MM PANEL THICKNESS, 36/46 FPM FEED SPEED, 208/230V - 3PH - 60 HZ - CONNECT 230V, **3MM TOOLING * PROMO PRICE!

31708

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31712

BRT KDN-520 SERVO
PC-20 CONTROLLER, AUTOMATIC MAGAZINE, NEW STANDARD GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, END TRIM UNIT WITH PNEUMATICS, FINE TRIM UNIT WITH SERVO MOTOR POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY. 208/230/440/480V - 3PH - 60 HZ - CONNECT 230V - 50 MM PANEL THICKNESS. 14 M/MIN FEED SPEED ( 46 FPM ). 3MM TOOLING * PROMO PRICE!

31721

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31723

BRT KTD-820 II W/TRIMMER
CONTOUR EDGEBANDER FOR GLUING STRAIGHT AND IRREGULAR SHAPED WORKPIECES, MAXIMUM EDGE CAPACITY IS 3MM, CAN BE OPERATED AS A STATIONARY UNIT OR AS A MOBILE APPLICATION WITH SPRING TENSION SUSPENSION FROM ABOVE, MAXIMUM WORK PIECE SIZE IS 4' X 12', VACUUM TABLE WITH 5 VACUUM PODS FOR LARGE PARTS, AUTOMATIC COIL CUT OFF DEVICE, PRE-HEATER FOR THICK PVC EDGES. 208/230/440/480 V, 3PH, 60HZ, CONNECT 230V. *INCLUDES 4310 EDGE TRIMMING DEVICE AND 2MM RADIUS CUTTER * PROMO PRICE!

31726

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31727

BRT KDN-210 B OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, BUFFING UNIT, *3MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31729

BRT KDN-210 OPTIMAT
ELECTRONIC LINE CONTROL, AUTOMATIC MAGAZINE, RE-CIRCULATING GLUING UNIT, 3 ROLLER PRESSURE ZONE, END TRIM UNIT, FINE TRIM UNIT WITH DFC TOOLING, OPEN SPACE TO ADD BUFFING OR SCRAPING UNIT IN THE FUTURE, 3 MM TOOLING, 208/230/440/480 VOLTS CONNECTED 230 VOLTS. * PROMO PRICE!

31734

BRT KDF-970 HD SERVO
PC-20, V-BELT TOP PRESSURE BEAM, JOINT TRIMMING UNIT, QUICK MELT, 20 MM EDGE THICKNESS, VARIABLE FEED SPEED 39-65 FPM, SERVO MOTOR TOP PRESSURE BEAM, END TRIM WITH PROGRAM TILT, FLUSH TRIM WITH 2-POSITION VERTICAL INDEXING, FINE TRIM WITH DFC TOOLING AUTO TILT WITH MANUAL SETTING TO EDGE THICKNESS AND SIDE COPY, TWO MOTOR CONTOUR TRIMMING UP TO 52 FPM FEED SPEED, PROFILE SCRAPING UNIT WITH PROGRAM CONTROL, BUFFING UNIT, OPEN SPACE TO ADD A POST HEATER, 208/230 VOLTS CONNECTED 230 VOLTS, 3 MM TOOLING. * PROMO PRICE!

31736

BRT KDN-650 C SERVO
PC-20, STANDARD GLUING UNIT, DUAL FEED SPEED 52 / 36 FPM, 36 FPM WHEN CONTOUR TRIMMING, END TRIM WITH PROGRAM CONTROLLED TILT, 12MM EDGE THICKNESS CAPACITY, FINE TRIM WITH DFC TOOLING AND SERVO MOTOR POSITIONING INCLUDING AUTO TILT FEATURE, TWO MOTOR CONTOUR TRIM UNIT # 4803, SCRAPING UNIT WITH PROGRAM POSITIONING, BUFFING UNIT, 3MM TOOLING, 208/230 VOLTS, 3 PH, 60 HZ, CONNECTED 230 VOLTS. * PROMO PRICE!

32747

BRT KDF-420 OPTIMAT NESTED
EC-10+ CONTROLLER, JOINT TRIMMING UNIT WITH DIAMOND 2 CUTTER HEADS, AUTOMATIC MAGAZINE, PANEL PRE-HEATING SHOE, GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, DOUBLE MOTOR END TRIM UNIT WITH STRAIGHT AND CHAMFER CAPABILITY - PNEUMATIC INDEXING FROM STRAIGHT TO BEVEL, FINE TRIM UNIT WITH 3-POSITION PNEUMATIC POSITIONING, SCRAPING UNIT WITH PNEUMATIC INDEXING, BUFFING UNIT. 8MM (5/16") WOOD CAPACITY, 60 MM PANEL THICKNESS, 46 FPM FEED SPEED, 208/230 - 3PH - 60 HZ - CONNECT 230V, **3MM TOOLING; EQUIPPED WITH NESTED-READY PACKAGE ON FINE TRIM AND SCRAPING STATIONS.

92747

BRT KDN-650 C OPTIMAT
*2004 MODEL. PC-16 CONTROLLER, AUTOMATIC MAGAZINE, INFRA-RED GLUE LINE HEATING SYSTEM, NEW STANDARD GLUING UNIT WITH RE-CIRCULATING DESIGN AND REQUIRING NO LUBRICATION, END TRIM UNIT WITH PNEUMATICS, FINE TRIM UNIT WITH PNEUMATIC INDEXING, CONTOUR TRIMMING UNIT, SCRAPING UNIT WITH PNEUMATIC INDEXING, BUFFING UNIT. 12MM (1/2") WOOD CAPACITY *USED MACHINE LOCATED IN HIGH POINT, NC, 90 DAY FUNCTIONAL WARRANTY *CLEARANCE PRICE! NO MANUAL FOUND ON NETWORK

Bütfering Widebelt Sanders

STOCK #

DESCRIPTION

25947

BUTF SCO 211 ML
TWIN HEAD PLANER / SANDER WITH AUTOMATIC POSITIONING OF THE CUTTER HEAD, CUTTER HEAD IS AN ALTERNATING SPIRAL DESIGN, CUTTER HEAD ROTATION IS 5000 RPM, SANDING HEAD IS A COMBINATION HEAD WITH 85 SHORE PROFILED RUBBER CONTACT DRUM AND AIR CUSHION PAD WITH TIMING SYSTEM, TWO SPEED ABRASIVE BELT EITHER 30 OR 60 FPS NOTE: 460 VOLT NOTE: NORDFAB DUST MANIFOLD AVAILABLE FOR THIS MACHINE (SEE MS# 26261 FOR PRICE INFO) *SHOW MACHINE LOCATED IN CHARLESTON, SC * CLEARANCE PRICE!

26514

BUTF SCO 311 MRL
TRIPLE HEAD PLANER / SANDER, 43" WIDE, WITH AUTOMATIC POSITIONING OF THE CUTTER HEAD, CUTTER HEAD IS AN ALTERNATING SPIRAL DESIGN, CUTTER HEAD ROTATION IS 5000 RPM, FIRST SANDING HEAD IS AN 85 SHORE PROFILED RUBBER CONTACT DRUM WITH AUTOMATIC POSITIONING, COMBINATION HEAD WITH 65 SHORE PROFILED RUBBER CONTACT DRUM AND AIR CUSHION PAD WITH TIMING SYSTEM, TWO SPEED ABRASIVE BELT EITHER 30 OR 60 FPS, 460 VOLT, 3 PHASE, 60 HZ - CONNECT VOLTAGE 460 V *SHOW MACHINE LOCATED IN GRAND RAPIDS, MI * CLEARANCE PRICE!

28649

BUTF SKO 213 RC
TE 11 TOUCH SCREEN PROGRAM CONTROL CONSTANT PASS LINE HEIGHT #1 HEAD IS AN 8" DIAMETER STEEL PROFILED CONTACT ROLLER WITH AUTOMATIC POSITIONING AND GRIT COMPENSATION #2 HEAD IS A COMBINATION HEAD WITH AN 85 SHORE PROFILED CONTACT ROLLER AND SEGMENTED PAD 35 MM WIDE SEGMENTS AUTOMATIC POSITIONING OF THE CONTACT ROLLER VARIABLE ABRASIVE BELT SPEED 2 - 18 M/SEC AIR JET ABRASIVE BELT CLEANING SYSTEM ROTATING PANEL CLEANING BRUSH VARIABLE CONVEYOR BELT SPEED RUBBERIZED HOLD DOWN ROLLERS IN FEED ROLLER TABLE EXTENSION 460 VOLTS * VACUUM FAN FOR BED INCLUDED. * PROMO PRICE!

29614

BUTF SKO 113 C
SINGLE HEAD 53" WIDE BELT SANDER, TE 11 TOUCH SCREEN PROGRAM CONTROL, VARIABLE CONVEYOR SPEED, COMBINATION HEAD WITH A PROFILED STEEL CONTACT ROLLER AND AN ELECTRONIC SEGMENTED PAD SANDING SYSTEM, VARIABLE ABRASIVE BELT SPEED AND AIR JET BELT CLEANING. SINGLE VOLTAGE 460. 208/230 VOLTS AVAILABLE WITH TRANSFORMER. *SHOW MACHINE LOCATED IN SEATTLE, WA * PROMO PRICE!

30075

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 460 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 460 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * CLEARANCE PRICE!

30299

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. *SHOW MACHINE LOCATED IN HIGH POINT, NC * CLEARANCE PRICE!

30561

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. *NEW MACHINE LOCATED IN POMONA, CA * PROMO PRICE!

30562

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. *NEW MACHINE LOCATED IN POMONA, CA * PROMO PRICE!

30567

BUTF SWO 313 RRF
TRIPLE HEAD MACHINE WITH: CONSTANT PASS LINE HEIGHT; 103" ABRASIVE BELT LENGTH; #1 IS A CONTACT ROLLER 9.5" DIAMETER PROFILED STEEL WITH AUTOMATIC POSITIONING; #2 IS A CONTACT ROLLER WITH 55 SHORE, PROFILED 9.5" DIAMETER ROLLER WITH AUTOMATIC POSITIONING, AIR JET BELT CLEANING SYSTEM; #3 IS AN AIR CUSHION PAD WITH AIR JET BELT CLEANING SYSTEM AND 30 FPS ABRASIVE BELT SPEED; VACUUM BED WITH INTERNAL FAN SYSTEM; ROTATING PANEL CLEANING BRUSH; VARIABLE CONVEYOR BELT SPEED 14-65 FPS; AUTOMATIC THICKNESS SETTING SYSTEM; 230/460 VOLT, 3 PHASE, 60 HZ- CONNECT VOLTAGE 230V *NEW MACHINE LOCATED IN POMONA, CA * PROMO PRICE!

31054

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31055

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31057

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 460 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31058

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31059

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31060

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31061

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31062

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31149

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31150

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31151

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31208

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31209

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31211

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31214

BUTF SBO 109
WORKING WIDTH 37" (950MM), 75" BELT LENGTH, COMBINATION HEAD WITH HEIGHT ADJUSTABLE STEEL ROLLER, 4-POSITION TURRET STOP, IN FEED BED EXTENSION, MOTORIZED THICKNESS ADJUSTMENT WITH LED READOUT, AUTOMATIC CONVEYOR BELT CENTERING, AUTOMATIC ELECTRONIC ABRASIVE BELT TRACKING, D C MOTOR BRAKE, 230 VOLT, 3 PHASE, 60 HZ. CONNECT VOLTAGE 230 VOLT THESE ARE SINGLE VOLTAGE MACHINES ONLY, A TRANSFORMER WILL ONLY BE SUPPLIED AT CUSTOMER EXPENSE. * PROMO PRICE!

31245

BUTF SCO 213 CE DIAMOND (DE)
DIAMOND MODEL WITH TE 11 TOUCH SCREEN PROGRAM CONTROL, FIRST HEAD AS A COMBINATION HEAD WITH A STEEL PROFILED CONTACT ROLLER WITH AUTOMATIC POSITIONING AND ELECTRONIC SEGMENTED PAD WITH 50 MM WIDE SEGMENTS INCLUDING PROGRAM CONTROLLED SANDING PRESSURE, AUTOMATIC HEAD LOCKING ON BOTH HEADS, SECOND HEAD IS AN ELECTRONIC SEGMENTED PAD WITH 25 MM WIDE SEGMENTS, VARIABLE ABRASIVE BELT SPEED FROM 1-9 M/S, AIR JET BELT CLEANING ON HEAD #2, VACUUM TABLE WITH INTERNAL FAN SYSTEM, VARIABLE CONVEYOR SPEED 2.5 - 13 M/MIN, PANEL CLEANING BRUSH WITH DRIVE MOTOR, 460 VOLT, 3 PHASE, 60 HZ *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

31246

BUTF SCO 213 CE DIAMOND (DE)
DIAMOND MODEL WITH TE 11 TOUCH SCREEN PROGRAM CONTROL, FIRST HEAD AS A COMBINATION HEAD WITH A STEEL PROFILED CONTACT ROLLER WITH AUTOMATIC POSITIONING AND ELECTRONIC SEGMENTED PAD WITH 50 MM WIDE SEGMENTS INCLUDING PROGRAM CONTROLLED SANDING PRESSURE, AUTOMATIC HEAD LOCKING ON BOTH HEADS, SECOND HEAD IS AN ELECTRONIC SEGMENTED PAD WITH 25 MM WIDE SEGMENTS, VARIABLE ABRASIVE BELT SPEED FROM 1-9 M/S, AIR JET BELT CLEANING ON HEAD #2, VACUUM TABLE WITH INTERNAL FAN SYSTEM, VARIABLE CONVEYOR SPEED 2.5 - 13 M/MIN, PANEL CLEANING BRUSH WITH DRIVE MOTOR, 460 VOLT, 3 PHASE, 60 HZ *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

31399

BUTF SGO 109 K
37" WIDE SINGLE HEAD WITH A COMBINATION HEAD 18 HP MAIN MOTOR STEEL PROFILED CONTACT ROLLER RUBBER HOLD DOWN ROLLERS AIR CUSHION PAD TWO SPEED CONVEYOR FEED 13 AND 26 FPM 75 " ABRASIVE BELT LENGTH POLY - V - BELT DRIVE SYSTEM * PROMO PRICE!

31400

BUTF SGO 109 K
37" WIDE SINGLE HEAD WITH A COMBINATION HEAD 18 HP MAIN MOTOR STEEL PROFILED CONTACT ROLLER RUBBER HOLD DOWN ROLLERS AIR CUSHION PAD TWO SPEED CONVEYOR FEED 13 AND 26 FPM 75 " ABRASIVE BELT LENGTH POLY - V - BELT DRIVE SYSTEM * PROMO PRICE!

31404

BUTF SKO 213 CC
53" WIDE TWO HEAD SANDER HEAD 1: COMBINATION HEAD WITH STEEL PROFILED CONTACT ROLLER SEGMENTED SANDING PAD SYSTEM AUTOMATIC POSITIONING OF THE CONTACT ROLLER 25 HP MAIN MOTOR 60 FPS CUTTING SPEED HEAD 2: COMBINATION HEAD WITH 65 SHORE RUBBER PROFILED CONTACT ROLLER SEGMENTED SANDING PAD SYSTEM AUTOMATIC POSITIONING OF THE CONTACT ROLLER 25 HP WITH VARIABLE CUTTING SPEED 7 - 60 FPS AIR JET BELT BLOWER ACTIVATED BY THE WORKPIECE CONSTAND PASS LINE HEIGHT TOUCH SCREEN CONTROL WITH 125 PROGRAM STORAGE RUBBER HOLD DOWN ROLLERS AUTOMATIC WORKPIECE THICKNESS SETTING PREPARED TO ADD VACUUM BED PANEL CLEANING BRUSH 460 VOLTS 3 PHASE * PROMO PRICE!

31415

BUTF SGO 311 RRK (DE)
43" WIDE TWO HEAD WITH A CONTACT ROLLER AND COMBINATION HEAD STEEL PROFILED CONTACT ROLLER 20 HP MAIN MOTOR 85 SHORE RUBBER PROFILED CONTACT ROLLER 20 HP MAIN MOTOR COMBINATION HEAD WITH 65 SHORE PROFILED RUBBER CONTACT ROLLER AND AIR CUSHION PAD 18 HP MAIN MOTOR WITH 40 FPS CUTTING SPEED AUTOMATIC POSITIONING OF ALL CONTACT ROLLERS EXTERNAL THICKNESS SETTING SYSTEM RUBBER HOLD DOWN ROLLERS INFEED ROLLER EXTENSION VARIABLE CONVEYOR FEED 8 - 42 FPM 75 " ABRASIVE BELT LENGTH POLY - V - BELT DRIVE SYSTEM * PROMO PRICE!

31520

BUTF SWO 313 RRF
TRIPLE HEAD MACHINE WITH: CONSTANT PASS LINE HEIGHT; 103" ABRASIVE BELT LENGTH; #1 IS A CONTACT ROLLER 9.5" DIAMETER PROFILED STEEL WITH AUTOMATIC POSITIONING; #2 IS A CONTACT ROLLER WITH 55 SHORE, PROFILED 9.5" DIAMETER ROLLER WITH AUTOMATIC POSITIONING, AIR JET BELT CLEANING SYSTEM; #3 IS AN AIR CUSHION PAD WITH AIR JET BELT CLEANING SYSTEM AND 30 FPS ABRASIVE BELT SPEED; VACUUM BED WITH INTERNAL FAN SYSTEM; ROTATING PANEL CLEANING BRUSH; VARIABLE CONVEYOR BELT SPEED 14-65 FPS; AUTOMATIC THICKNESS SETTING SYSTEM; 230/460 VOLT, 3 PHASE, 60 HZ- CONNECT VOLTAGE 230V * PROMO PRICE!

31618

BUTF SKO 213 RC
TE 11 TOUCH SCREEN PROGRAM CONTROL CONSTANT PASS LINE HEIGHT #1 HEAD IS AN 8" DIAMETER STEEL PROFILED CONTACT ROLLER WITH AUTOMATIC POSITIONING AND GRIT COMPENSATION #2 HEAD IS A COMBINATION HEAD WITH AN 85 SHORE PROFILED CONTACT ROLLER AND SEGMENTED PAD 35 MM WIDE SEGMENTS AUTOMATIC POSITIONING OF THE CONTACT ROLLER VARIABLE ABRASIVE BELT SPEED 2 - 18 M/SEC AIR JET ABRASIVE BELT CLEANING SYSTEM ROTATING PANEL CLEANING BRUSH VARIABLE CONVEYOR BELT SPEED RUBBERIZED HOLD DOWN ROLLERS IN FEED ROLLER TABLE EXTENSION 460 VOLTS * PROMO PRICE!

Weeke CNC Machining Centers

STOCK #

DESCRIPTION

29392

WEEKE VANTAGE 33
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 3075MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; (7) VERT DRILLS; REFERENCE FENCE RIGHT; SHEET LOCATION TO MACHINE REAR; HAND CONTROL; TOOL PICKUP; 300CU.M. VACUUM; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE * INCLUDES (1) OF VKNO-6531 - TOOL LENGTH CONTROL ADDED IN FIELD 7 SPINDLE BORING BLOCK WITH MOTOR 1-024-94-2750 7 SPINDLE BORING BLOCK WITHOUT MOTOR 2-024-94-3900 VTLF 250 VACUUM PUMP 4-042-01-0229 MAIN ROUTER MOTOR 2-017-95-2650 *LOANER MACHINE LOCATED AT MHC *PROMO PRICE!

30309

WEEKE VANTAGE 33 P
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; WOODTOOLS S/W PACKAGE; WORK SURFACE 3075MM X 1250MM; DUAL ZONE; SAFETY MATS AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 6-POSITION BRIDGE MOUNTED ROTARY TOOL CHANGER; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

30310

WEEKE VANTAGE 33 P
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; WOODTOOLS S/W PACKAGE; WORK SURFACE 3075MM X 1250MM; DUAL ZONE; SAFETY MATS AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 6-POSITION BRIDGE MOUNTED ROTARY TOOL CHANGER; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

30311

WEEKE VANTAGE 33 P
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; WOODTOOLS S/W PACKAGE; WORK SURFACE 3075MM X 1250MM; DUAL ZONE; SAFETY MATS AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 6-POSITION BRIDGE MOUNTED ROTARY TOOL CHANGER; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

31048

WEEKE VANTAGE 31 S
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; BARCODE SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 2475MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; PNEUMATIC REFERENCE STOPS INCLUDING SHEET LOCATION TO MACHINE REAR; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP; 300 CU/M/HR VACUUM PUMP; STEEL WELDMENT *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *INCLUDES: UPGRADE - TOOL LENGTH CONTROL *SHOWROOM MACHINE LOCATED IN GRAND RAPIDS, MI * PROMO PRICE!

31191

WEEKE VANTAGE 31 S
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; BARCODE SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 2475MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; PNEUMATIC REFERENCE STOPS INCLUDING SHEET LOCATION TO MACHINE REAR; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/460 V MULTI TAP; 300 CU/M/HR VACUUM PUMP; STEEL WELDMENT *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *INCLUDES: UPGRADE - TOOL LENGTH CONTROL *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!

31192

WEEKE VANTAGE 31 S
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; BARCODE SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 2475MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; PNEUMATIC REFERENCE STOPS INCLUDING SHEET LOCATION TO MACHINE REAR; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/480 V MULTI TAP; 300 CU/M/HR VACUUM PUMP; STEEL WELDMENT *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *INCLUDES: UPGRADE - TOOL LENGTH CONTROL *INCLUDES: UPGRADE - BARCODE SCANNING SOFTWARE *LOANER/RECONDITIONED MACHINE LOCATED IN GRAND RAPIDS, MI * PROMO PRICE!

31199

WEEKE VANTAGE 33 M
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 3075MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; (7) VERT DRILLS; PNEUMATIC REFERENCE STOPS LEFT FRONT; SHEET LOCATION TO MACHINE REAR; HAND CONTROL; 300 CU-M/HR VACUUM PUMP; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/230/480 V MULTI TAP; S/C TECH *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE, TOOL LENGTH CONTROL, AND PREPARATION FOR DUAL 300 CU-M/HR PUMP *SHOWROOM MACHINE LOCATED IN ONTARIO, CA *PROMO PRICE!

31500

WEEKE VANTAGE 31 S
OFFICE PC W/NETWORKING; WOODWOP 5.0; NC SIMULATOR; BASIC DXF SOFTWARE; BARCODE SOFTWARE; WOODDESIGN PACKAGE; WOODTOOLS S/W PACKAGE; WORK SURFACE 2475MM X 1250MM; SINGLE ZONE; SAFETY LIGHT BARRIER AND FENCES; 9 KW HSK-63 AIR COOLED ROUTER; 8-POSITION TABLE-END FIXED TOOL RACK; PNEUMATIC REFERENCE STOPS INCLUDING SHEET LOCATION TO MACHINE REAR; HAND CONTROL; BECKHOFF CONTROL; TELESERVICE W/ MODEM; FITTED FOR CONFIGURABLE VOLTAGE; 208/480 V MULTI TAP; 300 CU/M/HR VACUUM PUMP; STEEL WELDMENT *INCLUDES: INSTALL, (2) SEATS MC-050 OR -100, STARTUP TOOLING PACKAGE *INCLUDES: UPGRADE - TOOL LENGTH CONTROL *NEW MACHINE LOCATED IN CHARLESTON, SC * PROMO PRICE!